今天再來學習一個一次性筷子的變廢為寶教案，教程比較簡單、取材也方便，十分適合初學的手工愛好者。這次要用一次性筷子制作的是一個飛機模型，先收集到足夠多的筷子，洗干凈晾干后，再按下面小編為小伙伴們提供的圖解步驟，進行裁剪、粘連，組合，就可以得到一個飛機模型了，挺有創(chuàng)意的一個手工小制作，有興趣的話就來試試吧，不過要小心別把502膠弄到手上哦！

Today, let's learn a lesson plan about disposable chopsticks. The course is simple and easy to draw materials. It's very suitable for beginners. This time, we need to use disposable chopsticks to make an airplane model. First, we collect enough chopsticks, wash them and dry them. Then, we can cut, glue and combine them according to the graphic steps provided by the following editor for our friends, and we can get an airplane model. It's a creative Handmade model. If you are interested, you can try it, but be careful not to get 502 glue On hand!

材料：筷子一把、竹簽1根、剪刀、502、美工刀、砂紙80＃和240＃各一張。

Materials: a chopstick, a bamboo stick, scissors, 502, art knife, 80 sandpaper and 240 sandpaper.

1、工具。

1. Tools.

2、7根筷子沾一起。

2. Seven chopsticks together.

3、把頭削好，磨圓。

3. Cut and round the head.

4、切成這樣，差不多45°左右，差不多就行了。

4. Cut it like this, about 45 degrees, almost OK.

5、一根根排好。

5. One by one.

6、做好后。

6. After that.

7、一模一樣做二個。

7, as like as two peas, two.

8、先用80＃打磨，把兩個角度磨一樣，再用240＃打磨一下，更光滑一點。

8. First use 80 to grind the two angles the same, and then use 240 to grind them a little smoother.

9、做三個一樣的還是45°左右，不要太糾結(jié)角度。

9. Do three of the same or about 45 degrees, not too tangled angle.

10、其中一個上面再沾一根。

10. One of them has another on it.

11、全部粘一起。

11. Stick it all together.

12、具體步驟沒拍，差不多就這樣。

12. I didn't take the specific steps. That's about it.

13、做一個底盤。

13. Make a chassis.

14、支撐用的筷子。

14. Chopsticks for support.

15、粘好后。

15. After gluing.

16、尾巴這里粘成這樣，下面的是一根竹簽。

16. The tail is glued like this here. There is a bamboo stick under it.

17、完工。

17. Completion.

18、效果圖。

18. Rendering.

19、是不是很簡單。

19. Is it very simple.

好了，你們學會了嗎，如您想要了解更多資訊內(nèi)容請點擊網(wǎng)站：大型航天模型http://www.6re0un.cn 。

OK, have you learned? If you want to know more, please click the website: large space model http://www.6re0un.cn  .