仿真機械模型完成后，需要進行驗收確保制作出來的模型符合展示公司的營銷策略與外觀要求，如仿真機械模型完成存在誤差與突發狀況便于及時進行更改。那么仿真機械模型的驗收標準怎么樣呢？大型機器人模型制作廠家為您解說。

After the simulation mechanical model is completed, it needs to be accepted to ensure that the produced model meets the marketing strategy and appearance requirements of the display company. If there are errors and emergencies in the completion of the simulation mechanical model, it is easy to change it in time. What is the acceptance standard of the simulation mechanical model? Large robot model manufacturers will explain for you.

一、仿真度與精細度

1、 Simulation degree and fineness

1.仿真機械模型都是按照設備進行縮小或放大，所以在制作后需要對其模型的外觀尺寸進行確認，是否符合設計圖紙的制作要求。

1. The simulation mechanical model is reduced or enlarged according to the equipment, so it is necessary to confirm the appearance size of the model after production to see whether it meets the production requirements of the design drawings.

2.這里需要展示公司負責人進行現場核對，從而避免圖紙與設計圖紙中存在的尺寸差異，也是雙方公司進行現場確認仿真機械模型的道流程。

2. Here we need to show the on-site verification by the company's responsible person, so as to avoid the size difference between the drawings and the design drawings, which is also the process of the two companies to confirm the simulation mechanical model on site.

二、結構

2、 Structure

1.仿真機械模型展示的主題也是存在不一致的，有的公司模型展示工業產品的外觀，有的展示工業產品的內部結構，還有的展示其產品的工作原理。

1. The theme of simulation mechanical model display is also inconsistent. Some company models show the appearance of industrial products, some show the internal structure of industrial products, and some show the working principle of their products.

2.在進行驗收時，注意仿真機械模型的展示主題，進行確認其內部構造與外觀問題。

2. During acceptance, pay attention to the display theme of the simulation mechanical model and confirm its internal structure and appearance.

三、燈光效果

3、 Lighting effects

1.燈光效果在仿真機械模型中不是哪里都能使用的到，有些需要?jiǎng)討B(tài)演示的仿真機械模型需要設置燈光，以達到工業產品運行中的效果。

1. The lighting effect can not be used everywhere in the simulation mechanical model. Some simulation mechanical models that need dynamic demonstration need to be set with lights to achieve the effect in the operation of industrial products.

2.在這里需要對自身產品在運作中散發的光源進行確認，是否符合真實工業產品運行時的燈光場景。

2. Here we need to confirm whether the light source emitted by our own products in operation conforms to the lighting scene of real industrial products.

四、污漬處理

4、 Stain treatment

1.在制作仿真機械模型后，模型會留下一些比較難處理的污漬，污漬處理不好將影響到仿真機械模型的展示效果，在驗收時，注意仿真機械模型周邊是否存在污漬，如有則要求模型公司進行處理。

1. After making the simulation mechanical model, the model will leave some stains that are difficult to deal with. Poor treatment of the stains will affect the display effect of the simulation mechanical model. During acceptance, pay attention to whether there are stains around the simulation mechanical model. If so, ask the model company to deal with them.

為了避免在仿真機械模型完成后，展示公司需要進行細節修改，所以在初步制作完成后，需要邀請展示公司負責人進行驗收，保證仿真機械模型和設計圖紙無誤，需要將提供驗收流程供驗收人員進行驗收。更多相關事項就來我們網站http://www.6re0un.cn咨詢吧！

In order to avoid that the display company needs to modify the details after the completion of the simulation mechanical model, after the preliminary production, the person in charge of the display company needs to be invited for acceptance to ensure that the simulation mechanical model and the design drawings are correct, and the acceptance process needs to be provided for acceptance by the acceptance personnel. More related matters come to our website http://www.6re0un.cn Consult!